eterio 210 RA1

    eterio 210 RA1 server is a powerful two-processor configuration in 1U RACK chassis, based on Intel® Xeon® Scalable processors. It offers a wide range of processors for a wide range of applications, and 24 slots for DDR4 memory modules to support large RAM capacities. The expansion slots are available for standard PCI Express cards while in addition you can use network cards in OCP format or disk controllers in the form of mezzanine cards mounted in dedicated sockets directly on the motherboard.

    Intel Xeon Scalable processors is a new family of products with diverse performance and functionality. Depending on the features they have been divided into classes: Bronze, Silver, Gold and Platinum. They differ in the number of cores, the base frequency, the presence or absence of Turbo mechanisms, the number of built-in units for floating point calculations (AVX-512 FMA units), the number of UPI connectors and even the max speed and capacity of supported RAM. They have built-in network interfaces (Ethernet) and support more PCIe lines than the previous generation. Among the multiple models, you can choose the one which perfectly suits your needs.

    The server supports DDR4 Registered DIMM ECC (RDIMM), and Load Reduced DIMM (LRDIMM) with operating frequencies depending on the type of processor used and the available bandwidth of the UPI link. The 2400 MHz and 2666 MHz modules are available. In total up to 1,5TB RAM in 24 RDIMM modules or 3TB  RAM in LRDIMM modules is supported. The modules can work in max. 6-channel configurations – this is the optimal setup for best performance.

    Server supports: SATA HDD/SSD – there is  build-in SATA controller on mainboard. For SAS support you need add-in card: SAS/SATA HBA or SAS/SATA RAID adater available as mezzanine module or standard PCI Express adapter.  There is also possibility of supporting 2,5″ NVMe drives – mainboard offers 4 connectors for NVMe cables and additional drives  can be supported in 2,5″ chassis – when add-on adapters are used.

    1U RACK chassis  is available in two variants:  first with support  for standard 3.5 “disks: max 4 hot-swap disks, while  second is dedicated for 2.5” drives are available for configurations with up to 8 discs 2.5 “(SFF) SAS / SSD / NVMe hot-swap. The chassis allows the use of maximum two PCI Express full height expansion cards  – while both processors are needed to have them working. The standard chassis is equipped with a single 1100W power supply, but you can add a second one achieve redundancy.

    Chassis RACK 1U. Platform model R1304

    Bays: 4 x 3,5″ (HDD SAS/SATA hot-swap)
    1 x optical slim drive (DVD or DVD-RW)
    6 x  “dual-rotor” fan
    Front panel ports: 2 x USB, 1 x VGA

    Power supply: 1100W (optional redundant power supply module available), 80PLUS Platinum

    RACK 1U. Platform model R1208

    Bays: 8 x 2,5″ (HDD SAS/SSD/NVMe hot-swap)
    for NVMe support add-on card required
    6 x  “dual-rotor” fan
    Front panel ports: 2 x USB, 1 x VGA

    Power supply: 1100W (optional redundant power supply module available), 80PLUS Platinum

    Dimensions max.: (height x width x depth):  43,2 x 482,6 x 793,8 mm


    Intel® Xeon® Scalable (Skylake EP)

    Second Generation Intel® Xeon® Scalable (Cascade Lake)

    Memory slots


    Max. CPU



    Intel C624


    DDR4 Registered ECC, DDR4 3DS LRDIMM

    Max supported memory

    1,5 TB / 3TB

    Available modules

    8 GB

    16 GB

    32 GB

    64 GB

    Memory protection

    Memory Mirroring

    Memory Sparing


    Integrated controllers Intel C624,  SATA3 (6Gbps), 12 ports (2 x standard 7-pin, 2 x M.2, 2 x miniSAS HD connectors).
    Expansion slots 2 x PCIe 3.0 x16
    I/O ports 2 x VGA (1 x front panel)
    2 x LAN (RJ45)
    1 x LAN (RJ45) – dedicated for management
    1 x serial-A (RJ-45)5 x USB:
    – 3 x USB 3.0 back
    – 2 x USB 3.0 front (in configs with platforms R2224 i R2312 – 1x USB 2.0)
    – 1 x USB 2.0 type A (on mainboard)

    Intel Node Manager

    IPMI 2.0

    Opcjonalna karta RMM4 Lite – wsparcie dla “Remote KVM” oraz “Media redirection”

    Supported OS

    Red Hat Enterprise Linux Server 7.x

    SUSE Linux Enterprise Server 12 (64-bit)

    Microsoft Windows Server 2012

    Microsoft Windows Server 2012 R2

    Microsoft Windows Server 2016

    Citrix XenServer

    VMware vSphere

    Notice 1). Integrated SATA controllers: iSATA (8 ports – miniSAS HD connector)  and  sSATA (standard 11-pin SATA connectors + M.2 slot). When you intend to create RAID volumes – there is no possibility to use drives attached to different controlers  (volumes do not span across controllers)
    2).  “Soft-RAID”  created  volumes on SATA (iSATA or sSATA) controllers require dedicated drives and are not suppoorted with VMware and Citrix XenServer.
    Energy management


    Additional info Models with 8 x 2,5″ drive bays  do not support by default internal optical drive – external USB optical drive is required.There is an optional possibility to have second serial port (serial-B) as external DB9 connector.
    Integrated VGA

    BMC integrated Aspeed AST2500


    2 x 10 Gigabit Ethernet, RJ-45


    RACK 1U

    Certified OS Microsoft Windows Server 2016

    TPM 2.0 internal header (optional)