eterio 220 RA1

    eterio 220 RA1 server is a powerful two-processor configuration in a 2U RACK chassis, based on Intel Xeon Scalable processors. It offers a wide range of processors for a wide range of applications, and 24 slots for DDR4 memory modules to support large RAM capacities. The expansion slots are available for standard PCI Express cards while in addition you can use network cards in OCP format or disk controllers in the form of mezzanine cards mounted in dedicated sockets directly on the motherboard.

    Processors

    Intel Xeon Scalable processors is a new family of products with diverse performance and functionality. Depending on the features they have been divided into classes: Bronze, Silver, Gold and Platinum. They differ in the number of cores, the base frequency, the presence or absence of Turbo mechanisms, the number of built-in units for floating point calculations (AVX-512 FMA units), the number of UPI connectors and even the max speed and capacity of supported RAM. They have built-in network interfaces (Ethernet) and support more PCIe lines than the previous generation. Among the multiple models, you can choose the one which perfectly suits your needs.

    Memory

    The server supports DDR4 Registered DIMM ECC (RDIMM), and Load Reduced DIMM (LRDIMM) with operating frequencies depending on the type of processor used and the available bandwidth of the UPI link. The 2400 MHz, 2666 MHz and 2933 MHz modules are available. In total up to 1,5TB RAM in 24 RDIMM modules or 3TB  RAM in LRDIMM modules is supported. The modules can work in max. 6-channel configurations – this is the optimal setup for best performance.

    Storage

    Server supports: SATA HDD/SSD – there is  build-in SATA controller on mainboard. For SAS support you need add-in card: SAS/SATA HBA or SAS/SATA RAID adater available as mezzanine module or standard PCI Express adapter.  There is also possibility of supporting 2,5″ NVMe drives – mainboard offers 4 connectors for NVMe cables and additional drives  cab be supported in 2,5″ chassis – when add-on adapters are used.

    Chassis

    2U RACK chassis  is available in many variants allowing flexible selection of disks for installation. There are two versions available that support standard 3.5 “disks: max 8 or max 12 SAS / SATA hot-swap disks, while 2.5” drives are available for configurations with 8 discs 2.5 “(SFF) SAS / SSD / NVMe hot-swap (expandable up to 16 bays) or 24-disk version. The chassis allows the use of PCI Express expansion cards in the amount and type depending on the “riser” cards used. The standard chassis is equipped with a single 1300W power supply, but you can add a second one achieve redundancy.

    Specification

    Chassis RACK 2U. Platform model: R2308

    Bays: 8 x 3,5″ (HDD SAS/SATA hot-swap)
    1 x optical slim drive (DVD or DVD-RW)
    6 x hot-swap, redundant fans
    Front panel ports: 2 x USB, 1 x VGA

    Power supply: 1300W (optional redundant power supply module), 80PLUS Titanium

    RACK 2U. Platform model: R2312

    Bays: 12 x 3,5″ (HDD SAS/SATA hot-swap)
    6 x hot-swap, redundant fans
    Front panel ports: 1 x USB

    Power supply: 1300W (optional redundant power supply module), 80PLUS Titanium

    RACK 2U. Platform model: R2208

    Bays: 8 x 2,5″ (HDD SAS/SSD/NVMe hot-swap)
    for SAS/NVMe add-on card required
    1 x optical slim drive (DVD or DVD-RW)
    6 x hot-swap, redundant fans
    Front panel ports: 2 x USB, 1 x VGA

    Possible expansion: additional 8x 2,5″ cage

    Power supply: 1300W (optional redundant power supply module available), 80PLUS Titanium

    RACK 2U. Platform model: R2224

    Zatoki: 24 x 2,5″ (HDD SAS/SSD/NVMe hot-swap)
    for SAS/NVMe add-on card required
    6 x hot-swap, redundant fans
    Front panel ports: 1 x USB

    Power supply: 1300W (optional redundant power supply module available), 80PLUS Titanium

    DIMENSIONS max.: (height x width x depth):  89 x 482,6 x 769 mm

    Processor

    Intel® Xeon® Scalable (Skylake EP)

    Second Generation Intel® Xeon® Scalable (Cascade Lake)

    Memory slots

    24

    Max. CPU

    2

    Chipset

    Intel C624

    Memory

    DDR4 Registered ECC, DDR4 3DS LRDIMM

    Max supported memory

    1,5 TB / 3TB

    Available modules

    8 GB

    16 GB

    32 GB

    64 GB

    Memory protection

    Memory Mirroring

    Memory Sparing

    ECC

    SDDC

    Integrated controllers Intel C624,  SATA3 (6Gbps), 12 ports (2 x standard 7-pin, 2 x M.2, 2 x miniSAS HD connectors).
    Expansion slots First config:

    7 x PCIe 3.0 x8 (including 2 x in x16 and 1 x “low-profile”)

    1 x PCIe 2.0 x4 (in x8, “low profile”)

    Second config:

    2 x PCIe 3.0 x16

    3 x PCIe 3.0 x8 (including 1 x “low-profile”)

    1 x PCIe 2.0 x4 (in x8, “low profile”)

    I/O ports 2 x VGA (1 x front panel)
    2 x LAN (RJ45)
    1 x LAN (RJ45) – dedicated for management
    1 x serial-A (RJ-45)

    5 x USB:
    – 3 x USB 3.0 back
    – 2 x USB 3.0 front (in configs with platforms R2224 i R2312 – 1x USB 2.0)
    – 1 x USB 2.0 type A (on mainboard)

    Management

    Intel Node Manager

    IPMI 2.0

    Optional RMM4 Lite activation key – support for  “Remote KVM” and “Media redirection”

    Supported OS

    Red Hat Enterprise Linux Server 7.x

    SUSE Linux Enterprise Server 12 (64-bit)

    Microsoft Windows Server 2012

    Microsoft Windows Server 2012 R2

    Microsoft Windows Server 2016

    Microsoft Windows Server 2019

    VMware 6.0, 6.5

    Citrix XenServer

    Notice 1). Integrated SATA controllers: iSATA (8 ports – miniSAS HD connector)  and  sSATA (standard 11-pin SATA connectors + M.2 slot). When you intend to create RAID volumes – there is no possibility to use drives attached to different controlers  (volumes do not span across controllers)
    2).  “Soft-RAID”  created  volumes on SATA (iSATA or sSATA) controllers require dedicated drives and are not suppoorted with VMware and Citrix XenServer.
    3).   Some platforms are available without on-board LAN – there is wider choice of OCP LAN adapters for them.
    Energy management

      YES

    Additional info Models with the highest drives number: “R2224″ supporting 24 x 2,5” HDD/SSD or  “R2312″ supporting 12 x 3,5” HDD/SSD  do not support internal optical drive – external USB optical drive is required.

    There is an optional possibility to have second serial port (serial-B) as external DB9 connector.

    Integrated VGA

    BMC integrated Aspeed AST2500

    LAN

    2 x 10 Gigabit Ethernet, RJ-45 (available platforms without on-board LAN, OCP modules are supported)

    Chassis

    RACK 2U

    Certified OS Microsoft Windows Server 2016
    TPM

    TPM 2.0 internal header (optional)