eterio 225 RE1

    Etherio 225 RE1 server is a powerful two-processor configuration in a 2U chassis designed for RACK rcabinets, using Intel Xeon Scalable processors. It offers a wide range of processors for a variety of applications, and 12 slots for DDR4 memory modules fit into the optimal performance of a six channel memory controller. Extension slots are available for standard PCI Express cards and in addition you can use a disk controller in the form of a mezzanine card mounted in a dedicated slot directly on the motherboard.

    Intel Xeon Scalable processors is a new family of products with diverse performance and functionality. Depending on the features they have been divided into classes: Bronze, Silver, Gold and Platinum. They differ in the number of cores, the base frequency, the presence or absence of Turbo mechanisms, the number of built-in units for floating point calculations (AVX-512 FMA units), the number of UPI connectors and even the max speed and capacity of supported RAM. They have built-in network interfaces (Ethernet) and support more PCIe lines than the previous generation. Among the multiple models, you can choose the one which perfectly suits your needs.

    The server supports DDR4 Registered DIMM ECC (RDIMM), and Load Reduced DIMM (LRDIMM) with operating frequencies depending on the type of processor used and the available bandwidth of the UPI link. The 2400 MHz, 2666 MHz and 2933 MHz modules are available. In total up to 1,5TB RAM in 12 RDIMM modules and 1,5TB  RAM in LRDIMM modules is supported. The modules can work in max. 6-channel configurations – this is the optimal setup for best performance.

    Server supports: SATA HDD/SSD – there is  build-in SATA controller on mainboard. For SAS support you need add-in card: SAS/SATA HBA or SAS/SATA RAID adater available as mezzanine module or standard PCI Express adapter.  There is also possibility of supporting 2,5″ NVMe drives – depending on chassis model.

    2U RACK chassis with the possibility of installing up to 8 or 12 standard (3.5 “) SAS / SATA hot swap disks or 16” 2.5 “disks (SFF) SAS / SSD hot-swap. In addition, the version dedicated for 8 x 3.5 “disks is available in the” slim “optical drive .The chassis allows the use of PCI Express expansion cards in four sockets accepting full-height cards and two slots for “low profile”cards. The type and nominal power of the power supply depends on the specific chassis model.

    Chassis RACK 2U; 8x hot-swap 3,5 HDD″

    Bays: 8 x 3,5″ (HDD SAS/SATA hot-swap)
    1 x slim optical drive (DVD or DVD-RW)
    3 x 8 cm hot-swap fan
    Optional fron ports : 2 x USB, 1 x RS-232

    Power supply: redundant 2 x 740W (80PLUS Platinum) or redundant 2 x 1000W (80PLUS Titanium)

    RACK 2U; 12x hot-swap 3,5″ HDD

    Bays: 12 x 3,5″ (HDD SAS/SATA hot-swap)
    3 x 8 cm hot-swap fan
    Optional rear disk module – for 2x hot-swap 2,5″ HDD/SSD

    Power supply: redundant 2 x 920W (80PLUS Platinum) or redundant 2 x 1200W (80PLUS Titanium)


    Intel® Xeon® Scalable (Skylake EP)

    Second Generation Intel® Xeon® Scalable (Cascade Lake)

    Memory slots


    Max. CPU


    Chipset Intel C621 (on the motherboard with 1GbE LAN),

    Intel C622 (on the motherboard with 10GbE LAN)


    DDR4 Registered ECC, DDR4 3DS RDIMM, DDR4 3DS LRDIMM

    Max supported memory

    1,5 TB

    Available modules

    8 GB

    16 GB

    32 GB

    64 GB

    Memory protection

    Memory Mirroring

    Memory Sparing


    Integrated controllers Intel C621/C622,  SATA3 (6Gbps), 14 ports (including two supporting SATA DOMs)
    Expansion slots 4 x PCIe 3.0 x8 FH (with possible change to: 1 x PCIe 3.0 x16 + 2 x PCIe 3.0 x8)
    2 x PCIe 3.0 x8 LP
    1 x PCIe x16 for Add-On Module (AOM) – SAS/SATA RAID
    I/O ports 1 x VGA
    2 x LAN (RJ45)
    1 x LAN (RJ45) – dedicated for management
    6 USB 3.0:
    – 4 x rear USB 3.0
    – 2 x optional (on-board connector)

    Intel Node Manager 3.0
    IPMI 2.0
    SuperDoctor 5
    “Remote KVM” and “Media Redirection” functionality

    Supported OS

    Red Hat Enterprise Linux Server 7.x

    SUSE Linux Enterprise Server 12 (64-bit)

    Microsoft Windows Server 2012

    Microsoft Windows Server 2012 R2

    Microsoft Windows Server 2016

    Microsoft Windows Server 2019

    Microsoft Windows 10

    VMware ESXi 6.x

    Notice There are integrated: i-SATA controller (8 ports – two miniSAS HD connectors) and s-SATA (4 ports – one miniSAS HD connector, 2 standard SATA connectors with power connection for SATA DOM). When creating RAID sets, you can not use disks connected to different controllers in one storage volume.
    Energy management


    Additional info The board is equipped with an M.2 socket for NVMe disks (PCI Express) and a slot for micro SD card
    Integrated VGA

    BMC integrated Aspeed AST2500

    Integrated LAN

    2 x 1 Gigabit Ethernet, RJ-45 (or 2 x 10 Gigabit Ethernet, 10G BASE-T, RJ-45 – upon motherboard model upgrade)


    RACK 2U

    Certified OS Microsoft Windows Server 2016

    Microsoft Windows Server 2019


    TPM 2.0 internal header (optional)