Waterless liquid cooling solution

The ZutaCore HyperCool direct-to-chip, liquid cooling solution uses a highly efficient, two-phase boiling and condensation process moving large amounts of heat off the processors and away from servers.

HyperCool is a complete, closed-loop liquid cooling solution for cooling the hottest processors of 1500W and above.  It uses a direct-to-chip method, one of the most effective forms of chip cooling, to apply coolants directly to the chips to extract and disperse heat. No water is used in the cooling system, so equipment is protected from corrosion and other water-related threats.

The HyperCool data center liquid cooling solution is scalable and can be deployed in new or retrofitted data centers, supporting 100kW and above of computing power. The innovative design of HyperCool allows heat re-use in the data center, producing the lowest PUE and highest efficiency in any climate.

Use Cases

ZutaCore’s HyperCool dielectric liquid cooling solution can be configured for use in data center racks, in rear doors, and in whole rows. It can also be deployed in hot spots, across entire data centers, and edge facilities. The dielectric liquid cooling is prepared for any evolution in high-powered chips; there is no limit to what it can cool, even as processor packages progress toward 1000W and beyond.

Cloud data center cooling

HyperCool closed-loop liquid cooling fundamentally changes the economics of the data center by increasing power density 10x. REITs, hyperscalers, enterprises, and others are achieving significant financial benefits with even small changes to their data center cooling. For example, converting just 10 percent of data center floor space to high-density liquid cooling racks can double the revenue of the facility. Converting an entire data center to closed-loop, liquid cooled data center racks creates even more dramatic financial benefit, making it possible to generate 10x the revenue compared with traditional air-cooling equipment.

Edge data enter cooling

Virtually all edge computing is installed in spaces outside the highly controlled data center environment. With the HyperCool data center cooling solutions, it’s possible to roll a liquid cooled data center rack into any environment without the need for special air-conditioning or cooling water. And high-powered computing can be installed in 90 percent less space than traditional air-cooled hardware occupies. With these benefits, HyperCool liquid cooling systems enable edge everywhere, from IoT and on-prem industrial computing to hybrid-cloud fintech and more.

Data center server hot spot cooling

With the advent of commercially available 400+W processors, data centers are faced with the quandary of cooling intense heat loads in environments typically designed for chips of much lower power. HyperCool Dielectric Cold Plates attach to any data center processor to eliminate hot spots resulting from insufficient air flow, regardless of the environment or the package power. HyperCool cold plate cooling systems can be installed in any data center server, in rack or in rear door, even those originally designed for air cooling.

How it works?

Using a high efficient, two-phase boiling and condensation process, the ZutaCore HyperCool closed loop liquid cooling solution moves large amounts of heat off the processors and away from servers, with zero disruption to the data center.

Zero emissions is within reach
ZutaCore is ushering in a new, net-zero generation of data centers.
Unrivaled heat dissipation at the chip

HyperCool is uniquely built to cool dense, high-temperature compute environments. Its elegantly simple, mechanical, waterless, direct-to-chip evaporative cooling solution moves large amounts of heat off the chip — reliably, effectively, and safely, with no practical limit to heat dissipation.

Greatly reduced data center carbon footprint

The cornerstone of a net zero, sustainable data center strategy, a HyperCool liquid cooled data center reduces the consumption of scarce resources including energy, water, and land, while reducing capital and operating expenses by a magnitude of two.

More cooling in less space

A self-contained and self-regulating closed loop liquid cooling system, HyperCool triples the processing capacity of highly dense computing environments using less than 50% of the energy and half the space of conventional data center cooling systems. 

Zutacore Hypercool

A complete data center cooling solution

Dlaczego warto wybrać nasze rozwiązanie do wirtualizacji serwerów?

Direct-on-chip dielectric liquid cooling that delivers 10x more compute, 50% TCO reduction, and reduced CO2 emissions for a sustainable data center and industry. The ZutaCore HyperCool system includes:

HyperCool dielectric cold plate liquid cooling system

A direct-contact, self-regulated, pool-boiling based evaporator enabling networking and simultaneously cooling all chips, on-demand. Compact, easy to install, and capable of cooling up 1500W processors and above. HyperCool direct-contact, cold plate liquid cooling is qualified by leading processor manufacturers Intel and AMD and deployed in major server manufacturers including Dell, SuperMicro, ASUS, Pegatron.

HyperCool mainfold

A self-contained manifold that fits into standard and custom racks. Once mounted, it distributes the liquid refrigerant to all servers in the rack as well as directs vapor refrigerant to the Heat Rejection Unit.

HyperCool heat rejection unit

HyperCool is scalable and can be deployed in new or retrofitted data centers. It supports 100kW and beyond of computing power when used with a 6U water or 6U air in-rack Heat Rejection Unit (HRU). These self-contained, fully autonomous units have independent sensors, pumps, controllers, and multi-level leak detection and prevention. The HRU moves the liquid to the servers and ensures efficient condensation of the vapor and rejection of the heat it contains. The innovative design of HyperCool allows heat re-use in the data center producing the lowest PUE and highest efficiency in any climate.

Hypercool software defined cooling

The HyperCool Software Defined Cooling (SDC) solution automates resource provisioning and management to improve system performance and optimization. It provides monitoring and control for the server CPUs and the HyperCool Heat Rejection Units. It also provides server performance data and analytics – temperatures, load, utilization, clock speed, fan speed, and power consumption.

The benefits of liquid cooling ingenuity

Eliminate hot spots in server racks and the data center
Accelerate ubiquity of IoT, 5G, AI, edge
Cool increasingly dense CPUs, racks and data centers
Enable the design of new, high-density processors, servers, and racks
Fast and easy retrofits with zero disruption to the data center