Contact us:
serwery@eterio.eu
+48 510 562 528
PL
EN
Configurator

ETERIO 116 RE1

eterio 116 RE1 server is an advanced single-processor configuration designed for RACK cabinet (occupies 1U),. It is based on Intel Xeon Scalable processors. and offers a wide range of processors for a variety of applications. 6 slots for DDR4 memory modules are enough to support memory required by most of  application loads for which this servers was designed. Three horizontal expansion slots are available for standard PCI Express cards. The board also offers advanced network connectivity as standard – two 10 GbE ports with RJ-45 connectors and optionally you can use a version of the mainboard with a built-in HBA SAS/SATA controller.

Configure
Specifications
Chassis RACK 1U, 4 x Hot-Swap
Bays: 4 x 3,5″ – Hot-Swap SATA
1 x Slim 5,25″ optical drive
1 x Slim 3,5″ (eg. for optional module:  2 x USB + COM)
5 x fan (optionally expandable to 6 pcs.)
Power Supply: single 600W or 500W redundant
Dimensions: (height x width x depth): 43 x 437 x 650 mm

Rack 1U, 10 x Hot-Swap
Bays: 10 x 2,5″ – Hot-Swap SAS/SATA/NVMe*
5 x fan (optionally expandable to 6 pcs.)
Power Supply: 750W redundant
Dimensions: (height x width x depth):: 43 x 437 x 597 mm

*- only 2x NVMe possible
Processor

Intel® Xeon® Scalable (Skylake EP)
Memory slots

6
Max. CPU

1
Chipset

Intel C622
Memory

DDR4 3DS LRDIMM,  DDR4 LRDIMM,  DDR4 Registered ECC.
Max supported memory

768 GB / 384 GB / 192 GB
Available modules

8 GB

16 GB

32 GB

64 GB
Memory protection

Memory Mirroring

Memory Sparing

ECC
Integrated controllers Intel C622,  SATA3 (6Gbps), 10 ports (6 x standard 7-pin including 2 x  powered for SATA DOM, 1 x miniSAS HD connector – for 4 ports).
Expansion slots 2 x PCIe 3.0 x16

1 x PCIe 3.0 x8 (low-profile)
I/O ports 1 x VGA
2 x LAN (RJ45)
1 x LAN (RJ45) – dedicated for management
2 x serial – 1x back, 1x optional (internal header)

7 x USB 2.0 + 5 x USB 3.0:
– 2 x USB 3.0 at the back
– 2 x USB 3.0 (on front panel in 10-bay 2,5″ chassis and optional in 3,5″ chassis)
– 1 x USB 3.0 internal, type A
– 2 x USB 2.0 at the back
– 5 x USB 2.0 (optional, internal header)
Management

Intel Node Manager 3.0
IPMI 2.0
SuperDoctor 5
“Remote KVM” and “Media Redirection”
Supported OS

Red Hat Enterprise Linux Server 7.x

SUSE Linux Enterprise Server 12 (64-bit)

Microsoft Windows Server 2012

Microsoft Windows Server 2012 R2

Microsoft Windows Server 2016
Notice Server model with 10-bay 2,5″ chassis supports NVMe  U.2 (2,5″) drives using retimer add-on card.
Energy management

YES
Additional info Models with 10 x 2,5″ drive bays  do not support  internal optical drive – external USB optical drive is required.
Integrated VGA

BMC integrated Aspeed AST2500
LAN

2 x 10 Gigabit Ethernet, RJ-45
Chassis

RACK 1U
Certified OS Microsoft Windows Server 2016
TPM

TPM 2.0 internal header (optional)