ETERIO 117 RE2
Efficient and economical design in 1U RACK enclosure for new applications – where a single powerful processor with a wealth of resources (cores, PCI Express lanes, and memory capacity) suffices. The eterio 117 RE2 server supports the next generation of AMD EPYC server processors (families 7002 – “ROME” and 7003 – “MILAN”). The platform is equipped with 8 RAM slots and allows (depending on the choice of enclosure) the use of 4 standard 3.5″ drives or 8 standard 2.5″ drives. One PCIe 4.0 x16 expansion slot is available, and two dedicated M.2 PCIe 4.0 x4 slots – supporting, for example, NVMe SSDs. Some enclosures are available with a single power supply, while others are equipped with redundant power supplies.
Specifications
| Chassis | RACK 1U, 4 x Hot-Swap 3.5″ Bays: 4 x 3.5″ – Hot-Swap SATA 1 x Slim 5.25″ (e.g., DVD) 1 x Slim 3.5″ (e.g., optional panel 2 x USB + COM) 4 internal fans (expandable to 6 when using an expansion card in the PCIe slot) Power Supply: Single 350W 80PLUS Platinum, Single 600W 80PLUS Platinum, Redundant 400W 80PLUS Platinum, Redundant 600W 80PLUS Platinum, Redundant 800W 80PLUS Platinum Dimensions (H x W x D): 43 x 437 x 503 mm RACK 1U, 8 x Hot-Swap 2.5″ Bays: 8 x 2.5″ – Hot-Swap SATA 1 x Slim 5.25″ (e.g., DVD) 1 x Slim 3.5″ (e.g., optional panel 2 x USB + COM) 4 internal fans (expandable to 6 when using an expansion card in the PCIe slot) Power Supply: Single 600W 80PLUS Platinum, Redundant 600W 80PLUS Platinum, Redundant 800W 80PLUS Platinum Dimensions (H x W x D): 43 x 437 x 507 mm |
| Processor | AMD Epyc 7002/7003 series |
| Memory slots | 8 |
| Number of processors | 1 |
| Memory type | DDR4 Registered ECC, DDR4 3DS LRDIMM |
| Maximum supported memory | 2 TB / 1 TB |
| Available memory module sizes | 16 GB
32 GB 64 GB 128 GB |
| Memory protection mechanism | ECC |
| Integrated controllers | SATA3 8 ports (SATA 7-pin connectors including 2 with power for SATADOM)
SATA3 8 ports or 2x NVMe (SlimSAS x8 connector) 2 x M.2 PCIe 4.0 x4 (drives in 2280, 22110 format) |
| Expansion slots | 1 x PCIe 4.0 x16
2 x M.2 (22110, 2280), PCIe 4.0 x4 – for SSD NVMe disks |
| I/O ports | 1 x VGA
2 x LAN (RJ45) 1 x LAN (RJ45) – dedicated for management USB: – 4 x rear USB 3.0 – optionally 2 x front USB 2.0 or 3.0 (excluding cases that prevent this) |
| Management | SuperDoctor 5 IPMI 2.0 Optional software: Supermicro Power Manager (SPM) Supermicro Update Manager (SUM) Supermicro Server Manager (SSM) “Remote KVM” and “Media Redirection” features |
| Supported operating systems | Red Hat Enterprise Linux Server 7.x, 8.x
SUSE Linux Enterprise Server 12, 15 (64-bit) Microsoft Windows Server 2016 Microsoft Windows Server 2019 Microsoft Windows Server 2022 VMware ESXi 6.x, 7.x XenServer 7.x Ubuntu LTS CentOS |
| Notes | Available in three board versions: with/without SAS controller and a version with SAS controller and 2 10GbE RJ45ports |
| Intelligent power management | YES |
| Additional information | To support NVMe drives in an enclosure with 24 NVMe U.2 drives, dedicated expansion cards are required, which reduce the number of available PCIe slots.
The enclosures can be fitted with a dedicated cable arm or a bezel that blocks physical access to the drives. |
| Integrated graphics card | BMC integrated Aspeed AST2500 |
| Integrated network card | 2 x Gigabit Ethernet, RJ-45 (based on Broadcom BCM5720) |
| Chassis form factor | RACK 1U |
| Certified operating systems | Microsoft Windows Server 2019 |
| TPM | Slot for TPM 2.0 module |