ETERIO 127 RE2
The eterio 127 RE2 is a powerful yet cost-effective 2U rackmount server designed for new application areas where a single robust processor with abundant resources (cores, PCI Express lanes, and memory support) is sufficient. It supports the latest generation of AMD EPYC server processors. The platform is equipped with 8 RAM slots and offers flexibility in storage options: depending on the chassis chosen, it can accommodate either 8 standard 3.5″ disks, 16 standard 2.5″ disks (including up to 6 NVMe U.2 drives), or 24 2.5″ disks (SFF SAS/SATA or NVMe U.2).
The server features 7 PCIe 4.0 low-profile slots and provides two dedicated M.2 PCIe 4.0 x4 slots for, for example, NVMe SSDs. Some chassis options come with a single power supply, while most are equipped with a redundant power supply configuration.
Specifications
| Chassis | RACK 2U; 8 Hot-Swap 3.5″ Drives Bays: 8 x 3.5″ (HDD SAS/SATA hot-swap) 1 x slim drive (DVD or DVD-RW) 3 x 8-cm hot-swap fans Optional front ports: 2 x USB, 1 x RS-232 Power supply: redundant 2 x 800W (80PLUS Titanium) or redundant 2 x 1000W (80PLUS Titanium) RACK 2U; 12 Hot-Swap 3.5″ Drives Bays: 12 x 3.5″ (HDD SAS/SATA hot-swap) 3 x 8-cm hot-swap fans Optional mounting module: For 2 additional 2.5″ hot-swap drives Power supply: redundant 920W (80PLUS Platinum), or optionally redundant 2 x 1200W (80PLUS Titanium) RACK 2U; 16 Hot-Swap 2.5″ Drives Bays: 16 x 2.5″ (HDD SAS/SATA hot-swap, including optionally up to 6 x NVMe U.2) Optional slim drive: (DVD or DVD-RW) 3 x 8-cm hot-swap fans Optional front ports: 2 x USB, 1 x RS-232 Power supply: redundant 2 x 1200W (80PLUS Titanium) RACK 2U; 24 Hot-Swap 2.5″ Drives Bays: 24 x 2.5″ (NVMe U.2) 3 x 8-cm hot-swap fans Power Supply: redundant 2 x 1200W (80PLUS Titanium) |
| Processor | AMD Epyc 7002/7003 series |
| Memory slots | 8 |
| Maximum number of processors | 1 |
| Memory type | DDR4 Registered ECC, DDR4 3DS LRDIMM |
| Maximum supported memory | 2 TB / 1 TB |
| Available memory module sizes | 16 GB
32 GB 64 GB 128 GB |
| Memory protection mechanism | ECC |
| Integrated controllers | SATA3: 8 ports (7-pin SATA connectors, including 2 with power for SATA DOM)
SATA3: 8 ports or 2 x NVMe (SlimSAS x8 connector) 2 x M.2 PCIe 4.0 x4 (2280, 22110 format drives) |
| Expansion slots | 5 x PCIe 4.0 x16 (LP)
2 x PCIe 4.0 x8 (LP) 2 x M.2 (22110, 2280), PCIe 4.0 x4 – for SSD NVMe disks |
| I/O ports | 1 x VGA
2 x LAN (RJ45 1 x LAN (RJ45) – dedicated for management USB: – 4 x rear USB 3.0 – Optional: 2 x front USB 2.0 or 3.0 (excluding cases where this is not possible, such as 12 x 3.5″ or 24 x 2.5″) |
| Management | SuperDoctor 5
IPMI 2.0 Optional Software: Supermicro Power Manager (SPM) Supermicro Update Manager (SUM) Supermicro Server Manager (SSM) Built-in support for “Remote KVM” and “Media Redirection” |
| Supported operating systems | Red Hat Enterprise Linux Server 7.x, 8.x
SUSE Linux Enterprise Server 12, 15 (64-bit) Microsoft Windows Server 2016 Microsoft Windows Server 2019 Microsoft Windows Server 2022 VMware ESXi 6.x, 7.x XenServer 7.x Ubuntu LTS CentOS |
| Notes | Three versions of the motherboard are available: with/without a SAS controller, and a version with a SAS controller and 2 x 10GbE RJ45 ports |
| Intelligent power management | YES |
| Additional information | To support NVMe drives in the chassis with 24 NVMe U.2 disks, dedicated expansion cards are required, which will reduce the available PCIe slots. Dedicated cable management arms or physical blockers can be installed in the chassis to restrict physical access to the drives. |
| Integrated graphics card | BMC integrated Aspeed AST2500 |
| Integrated network card | 2 x Gigabit Ethernet, RJ-45 (based on Broadcom BCM5720) |
| Chassis form factor | RACK 2U |
| Certified operating systems | Windows Server 2019 |
| TPM | Slot for TPM 1.2/2.0 module |